NB58G001 / NB58G002

Technical Data		NB58G001 - Two levels		NB58G002 - Stretched form
Equipment		2 Process Zones, length 1.6 m each, with Dust Covers, Automatic Looping Unit, PLC-controlled, Steel Frame;		2 Process Zones, length 1.6 m and 1 m, with Dust Covers, Automatic Looping Unit, PLC-controlled, Steel Frame;
		can be equipped with liquid or dispersion metering devices, heater, dust collecting unit etc.		can be equipped with liquid or dispersion metering devices, heater, dust collecting unit etc. completely enclosed for clean air ventilation
Preferred application		for abrasive cleaning off of drawing residues or oxides (also liquid supported), e. g. first step abrasive preparation, second step dry cleaning preparation of wire for electrolytic or chemical plating
Process area		1	2	1	2
Recommended wire diameter (mm) (AWG)		~ 0.2 (32) – 1.5 (15)		~ 0.2 (32) – 6 (3)
Max. friction force (N)		~ 150	~ 70	~ 150	~ 70
Cord-tension at pay-off-side (N)		5 – 100	5 – 40	5 – 100	5 – 40
Max. cord tension at take-up-side (N)		250	80	250	80
Adjustable speed of HELICORD (cm/min.)		10 – 120
Control		All parameters controlled by PLC and displayed on operator panel
Power supply		16 Amp. 3 P+N+E 380 V 50 Hz
Power consumption (W)		Max. 1,000
Operational conditions	Ambient temperature(°C)(°F)	Clean air for electrical cabinet: max. 40 (104) Environment: max. 50 (122)
	Rel. air humidity (%)	80 (not condensing)

NEWS