NB57G006 / NB57G008 / NB57G011

Technical Data

NB57G006

NB57G008

NB57G011

Equipment

Process Zone, length 1 m, with Dust Cover,

Automatic Looping Unit,

PLC-controlled,

Liquid Metering Unit,

Steel Frame;

Process Zone, length 1 m, with Dust Cover,

Automatic Looping Unit,

PLC-controlled,

Hot Air Circulation Unit,

Steel Frame;

Process Zone, length 1 m, with Dust Cover,

Automatic Looping Unit,

PLC-controlled,

Steel Frame;

Preferred application

Primary
  • For application of liquid lubricants, like oil
  • Larger wires
  • Reversing wire direction
  • Higher speed
  • E.g. welding wire
  • For Helilub lubricating of cold (also reversing) wire at high VxD
  • Dry cleaning of solid or stranded wires
  • Up to 12 mm diameter
  • Reversing wire direction
  • Higher speed
  • E. g. before the extruder

Other
  • For cleaning wire and insulated conductors (also solvent-supported) up to 12 mm
  • For dry cleaning of large diameter wires and strands up to 12 mm

 

Recommended wire

diameter (mm)

Max. 12.0

Max. friction force (N)

Same

direction

90

Opposite direction

~ 70 - 90 (depending on cord speed)

Cord-tension at pay-off (N)

Same

direction:

max. value

100 (limited by PLC)

Opposite direction:

max. value

40

Max. cord tension at take-up (N)

Same

direction

40

Opposite direction

80 - 100 (depending on cord speed)

Max. temperature (°C)

-

140.0

-

Adjustable flow rate

(ml/minute)

4.0 to 8.0

-

Adjustable speed of Helicord (cm/min.)

10 - 120

Control

All parameters controlled by PLC and displayed on operator panel

Connection power

16 Amp 3 P+N+E 380 V 50 Hz (other options on request)

Power consumption (W)

Max. 3,000

Max. 500

Operational conditions

Ambient temperature

(°C) (°F)

max. 40 (104)

Rel. air

humidity (%)

80 (not condensing)

 

 

<< back to list

NB57G006
NB57G006

Downloads