NB55W

Microprocessor controlled NB55 for finishing of welding wires

 

Technical Data

NB55W1

for use on barrel coilers

NB55W2

for unse on none reversing spool winders

Equipment

Process Zone, length 1 m, with Dust Cover, Liquid Metering Pump,

Mounting Support

Swivelling Process zone, length 1 m, with Dust Cover,

Liquid Metering Pump, Mounting Support

Preferred application
  • For applilcation of surface properties enhancing liquids, e.g. oil, with Helicord strings tonot reversing wire
  • Recommended only for the same direction run mode of the wire

 

Recommended wire diameter (mm)

up to 3.0

Max. friction force (N)

 

Same direction

~ 90 (not evaluated)

Opposite direction 

~ 70-90 (depending on cord speed) 

Cord-tension at pay-off (N)

Same direction:

max. value

1001

 

Opposite direction

40 

Max. cord tension at take-up (N)

Same direction

40

 

Opposite direction 

 80  - 100 (dependingon cord speed)

Adjustable flow rate

0.5 to 10.0 ml/minute

-

Adjustable speed of Helicord (cm/min.)

6 - 120

Control
  • Display and Adjustment of Cord tension at pay-off, cord speed and dosage
  • Wire stop
  • Cord speed and liquid dosage controlled by wire speed sensor

 Alarms
  • Friction force alarm
  • Cord break alarm activated by stop of the dancer

Connection power

230 V 50/60 Hz, 2.5 Amp. Fuse

Power consumption (W)

Max. 500

1) Higher values as displayed are possible. More than 250 N may affect the machine 

 

 

  back to overview

NB55W1
For use on barrel coilers
NB55W2
For use on precision winders

Downloads